ASKO W6641 W661 - Manual (Page 11)

Page 11
ENGLISHENGLISH
THE CONTR THE CONTR OL P OL PANEL ANEL
W6221 OPERA W6221 OPERATING INSTR TING INSTRUCTIONS UCTIONS
Door Open Button
Press to open the glass door. (Please
note that the unit must be at the end of
a program to open the glass door.)
Super Rinse Button
Press to program two
additional rinses.
Start/Stop Button
Press to start or
stop/ interrupt a
program.
Power Button
Press to turn on power
to the machine.
Program Control
Turn to select a program. (Please
note that the dial does not move
as the program advances.)
Power Indicator Light
Glows when the power
is turned on.
Temperature Control
Turn clockwise to set the
wash temperature.
Delay Start Button
Press to delay starting the
program for five hours.
Spin Speed Control
Turn to select the spin
speed for the final spin.
W6221 PROGRAMS AND OPTIONS W6221 PROGRAMS AND OPTIONS
Definition Option
Super Rinse – Provides two additional rinses. Recommended for persons with sensitive skin or allergies.
Delay Start – Automatically delays starting the program for five hours.
Your ASKO washer has several programs and options
specifically designed to give you the cleanest laundry possible. The tables below define each program and
option.
CAUTION! Some fabrics may not be able to withstand extremely hot temperatures. Please
refer to the Recommended Wash Temperatures chart on page 9.
Dial
# Program
Pre-
wash
Main
Wash
Wash
Action
Temp.
(° F)
#
Rinses
Int.
Spin
Final
Spin Spin
Speed
Load
Size
1 Stain yes Long Normal 140 5 2 Long 1200 Full
2 Heavy wash no Long Normal 140 5 2 Long 1200 Full
3 Normal wash no Short Normal 105 5 2 Long 1200 Full
4 Synthetic wash no Short Normal 105 3 no short 800 Half
5 Quick wash no Short Normal 105 3 no Long 1200 Full
6 Super quick wash no Short Normal 105 2 no Short 800 Half
7 Wool wash no Short Gentle 85 3 no Short 800 Third
8 Hand wash no Short Gentle 85 3 no Short 800 Third
9 Rinse n/a n/a n/a n/a 1 n/a Long 1200 Full
10 Spin n/a n/a n/a n/a n/a n/a Long 1200 Full
11 Drain n/a n/a n/a n/a n/a n/a n/a n/a Full
POWER BUTTON
The Power button turns the power to the machine on
and off. When the power is on, the power indicator light
glows red. The power must be on before you can open
the door, set the programs or start the machine.
START/STOP BUTTON
Once you’ve selected the program and options, press
this button to start the washer. To stop the washer during
a program, press and hold this button down for a few
seconds. If you press this button to stop a program, you
will have to reselect the program to restart the unit.
DOOR OPEN BUTTON
The power must be on and you must press this button
to open the door. There will be a few seconds delay
before the door opens. Please note that the unit must
be at the end of a program and the water drained before
the door will open.
INTERRUPTING OR CHANGING A
PROGRAM
If you wish to interrupt a program to add an item to the
wash, press and hold the Start/Stop button until the unit
stops. Turn the Program Control knob to 11 (Drain) to
drain the water. Press the Door Open button. The door
will open when the water has drained. Insert the item
you wish to wash and close the door. Add detergent (if
needed), turn the control knobs to the desired settings,
and press Start/Stop to restart the machine.
SPIN SPEED CONTROL
In addition to the 400 rpm to 1200 rpm spin speed
options, the Spin Speed Control has a No Spin/No Drain
option (
) and a No Spin ( ) option. These are for
delicate fabrics that should not be spun dry. (NOTE: If
you select No Spin/No Drain, you will have to run the
Drain program (11) before you can open the door.)
NOTE: Program times will increase when you select higher wash temperatures. (See “Temperature Control” on page 3.)