Kinivo BTX110 Wireless Bluetooth Mini Portable Speaker - Manual (Page 21)

www.kinivo.com
Technical Support: [email protected]
Page 18
Listening to Wired Music
Use the included 3.5mm wire on the bottom of the speaker in
order to play music from a non-Bluetooth device. By default, the
speaker is in the Bluetooth connection mode. To switch from
Bluetooth to wired play, press the Mode button two times in quick
succession.
Note: The LED indicator light on your speaker will glow solid blue
when switched from Bluetooth mode to wired play mode.
Connect the audio cable on the bottom of the speaker to the audio
input or headphone jack on the device. Once connected, you can
use the controls on the speaker to control the music on the device.
Note: Listening to music through a wired connection does not
require Bluetooth connectivity or pairing with a device.
For more information the controls for Music Mode, refer to De-
vice Layout section on page 3.
To switch from wired play back to the Bluetooth connection, press
the Mode button two times in quick succession. The blue LED
light will flash when the speaker switches back to the Bluetooth
mode.