iPazzPort SY-20-19VC-0 - Manual (Page 7)

Connecting the Pearl Entertainment System to a TV
and Powering On:
1. Connect HDMI (or RCA cable) to your TV (or Monitor or Projector).
2. Using your TV's “Input” or “source” button, select the input location being
used (HDMI, Video 1, Auxiliary etc.)
3. Next, plug the HDMI cable into the back of the Pearl in Port #7
(also shown below). If using the RCA adapter, insert the cable
into Port #5.
4. Insert the Power Supply into Port #9 AND THEN PLUG THE
POWER SUPPLY INTO YOUR ELECTRICAL OUTLET.
Indicator
Headset jack
Page up/ down
LED button
Power swith
Power HDMI
Port 5