Rubbermaid FG750824 - Manual

TC Hand Sanitizer Station
Assembly Instructions
1. Set base plate with rubber feet on the floor.
2. Add lock washer (from enclosed hardware
kit) to top of base plate on center threaded
extension.
3. Attach recessed end of lower column to the
base plate, by twisting it clockwise until firmly
attached (no gap).
4. Place upper column into lower column and
twist clockwise to tighten completely.
5. Using the hardware kit included, attach
dispenser to mounting plate, and tighten
firmly. (Hardware kit includes 4 screws and
4 lock nuts for attaching the dispenser.)
MOUNTING DISPENSER
STAND ASSEMBLY
Fully Assembled Stand
Hardware Kit
Location
A
B
C
A
B
C
4870045 Rev 01 Printed on 10 percent post-consumer recycled paper.
World Headquarters:
Serving North and South America
Technical Concepts LLC
1301 Allanson Road
Mundelein, Illinois 60060 U.S.A.
Toll Free: 1-800-551-5155
Fax: 1-800-551-5046
European Headquarters:
Serving europe, Africa and Middle east
Technical Concepts International Ltd.
Peterborough, Pe2 6WA, england
Phone: +44 (0)870 568 6824
www.technicalconcepts.com
Asian Headquarters:
Serving Asia and Pacific
Technical Concepts Asia
No. 887, Jalan Perindustrian Bukit
Minyak, Bukit Minyak
14100, Penang, Malaysia
Phone: (60) 4 508 5008
1
2
3
4
5