Osd functions, F1 goto – ATEN ACS1208 User Manual

Page 36

ACS1208 / ACS1216 User Manual

OSD Functions

OSD functions are used to configure and control the OSD. For example, you
can: rapidly switch to any port; scan selected ports only; limit the list you wish
to view; designate a port as a Quick View Port; create or edit a port name; or
make OSD setting adjustments.

To access an OSD function:

1. Either Click a Function Key field at the top of the Main Screen, or press a

Function Key on the keyboard.

2. In the Submenus that appear make your choice either by Double Clicking

it, or moving the Highlight Bar to it, then pressing [Enter].

3. Press [Esc] to return to the previous menu level.

F1 GOTO:

Clicking the F1 field or pressing [F1] activates the GOTO function. GOTO
allows you to switch directly to a port either by keying in the port's Name, or
its Port ID.

To use the Name method, key in 1; key in the port's Name; then press

[Enter].

To use the Port ID method, key in 2; key in the Port ID; then press

[Enter].

Note: You can key in a partial Name or Port ID. In that case, the screen will

show all the computers that the User has View rights to (see SET
ACCESSIBLE PORTS, page 30), that match the Name or Port ID
pattern, regardless of the current List settings (see F2 LIST, page 25, for
details).

To return to the OSD Main Screen without making a choice, press [Esc].

acs1208-1216.book Page 24 Friday, April 27, 2007 3:23 PM

This manual is related to the following products:

ACS1216