Apex Digital PD-480 - Manual (Page 15)

En 15 15
Preparation
Connect the portable DVD player with the AC adaptor and/or battery pack, and playback through
headphones, speakers, or home theater system.
To connect to home theater or stereo system:
Turn on the TV set, and select “Video” as the TV input.
Turn on the home theater/stereo system and select the input source which you connected the
portable DVD player.
Basic Playback
1 Slide POWER ON/OFF switch to POWER ON.
2 Press button to open the disc cover.
3 Place Disc in the tray with the printed side up.
Hold the disc without touching the playable surface, position it with the printed title side facing up, align it
with the guides, and press the disc firmly onto the center spindle.
4 Close the disc cover.
Close the disc cover, the portable DVD player will start playback automatically.
If the disc contains one or more titles, a menu screen will appear on the screen.
<< NOTE: Proceed with steps 5 and 6 when a menu is available on the disc >>
5 Press < / / / > to choose the preferred selection.
6 Press or .
The player will start playback of the selected item.
Stopping Playback and Returning to The Menu Screen (If a Menu Screen Is Available on
The Disc)
Press
The portable DVD player stops playback, and then displays the menu screen.
After operation
When the portable DVD player is not in use, remove the disc and slide POWER ON/OFF switch to turn off
the player. Then close the display panel.
<< NOTE >>
The disc continues to spin while the menu is displayed even after the player has finished playing a
particular disc. When no further selections are to be played, be sure to press the
button to clear the menu screen.
If the disc is placed in upside down (and it is a single sided disc), the player’s display will appear “BAD
DISC”.
For your reference:
When appears while a button is being operated, it means that the corresponding operation is pro-
hibited by the player.
1-1 DVD Playback