HP Officejet Pro 8600 - Manual (Page 35)

3. Slide the media guides in the tray to adjust them for the size that you have
loaded.
4. Gently reinsert the tray.
5. Pull out the extension on the output tray.
Configure trays
NOTE: Tray 2 is an optional accessory. For ordering information, see Order
printing supplies online.
To configure the trays, you must have Tray 2 installed and turned on.
By default, the printer draws media from Tray 1. If Tray 1 is empty, the printer draws
media from Tray 2 (if it is installed and loaded with media). You can change this default
behavior by using the following features:
•
Tray Lock: Use this feature to protect special media such as letterhead or
preprinted media from accidental use. If the printer runs out of media while
printing a document, it will not use media from a locked tray to complete the print
job.
• Default Tray: Use this feature to determine the first tray from which the printer
draws media.
Install the accessories 31