Appendix, Faq’s – ADS Technologies HDUP-1500 User Manual
Page 31
HDTV UpConverter 31
English
Appendix
S-Video 1
4
Component 1
1
S-Video 1
4
Component 2
2
S-Video 1
4
Component 3
3
S-Video 2
5
Component 1
1
S-Video 2
5
Component 2
2
S-Video 2
5
Component 3
3
S-Video 3
6
Component 1
1
S-Video 3
6
Component 2
2
S-Video 3
6
Component 3
3
RCA Video 1
7
Component 1
1
RCA Video 1
7
Component 2
2
RCA Video 1
7
Component 3
3
RCA Video 2
8
Component 1
1
RCA Video 2
8
Component 2
2
RCA Video 2
8
Component 3
3
RCA Video 3
9
Component 1
1
RCA Video 3
9
Component 2
2
RCA Video 3
9
Component 3
3
TV Tuner
10
Component 1
1
TV Tuner
10
Component 2
2
TV Tuner
10
Component 3
3
FAQ’s
User Notes:
1.) On the Brightness/Color – Main Video menu why can’t I change the Vertical Sharpness?
a. We have set the type of Motion Adaptive De-interlacing (MADI) to SPATIAL in the Video
Output settings menu as the default setting because we fell this presents the best image
quality. If you change the MADI setting to Vertical Temporal (VT), you will notice that
now you can change the Vertical Sharpness setting in the Brightness/Color – Main
menu
2.) I connected my Progressive DVD player and now I cannot select MADI settings or Noise
reduction fi lters.
a. This is because your input signal is already a progressive signal and de-interlacing
cannot be performed.
b. This function will also apply to 480p or 720p input from an HD cable, satellite or
terrestrial signal.
3.) I have made lots of changes but I’d like to reset back to factory defaults. How can I do this?
a. Unplug the UpConverter power Cable.
b. Re-attach the power cable.
c. Press and hold down the Channel Up Button on the front panel of the UpConverter.
d. While holding down the Channel Up Button, Press the Power button. The unit will
power up and you will notice the following message in the display area:
“RESET ADS TECH Factory Defaults”.