ADS Technologies HDUP-1500 - Manual (Page 27)

HDTV UpConverter 27
English
Functions
- Resolution
Use the remote to cycle through the available resolution settings. If you are using
a TV or display that accepts the default settings of 480i, 480p, 720p or 1080i, you
can select these resolutions from the buttons on the remote or from the front panel
display.
If you have a fi xed pixel display such as a Plasma or LCD fl at panel or a front
projection device which support native resolutions, you can use this menu to cycle
through the additional resolutions supported by the HDTV UpConverter; 852 x
480p, 1024 x 1024p, 1280 x 768p, 1280 x 1024p
* Check the owner’s manual for your display device and select only resolutions that
are documented as supported by your display device.
- Format
The default format is Expand. Expand will provide the maximum horizontal width
and vertical height that is appropriate for the processed video content. When
output is set to Expand you have the option of manually adjusting the horizontal and
vertical size. The Input Format setting selection can affect the output format and
output aspect ratio. You can use the remote control to change this menu or the
View Mode button to change the output aspect ratio from Expand to Pillar Box or
Panoramic. In 480i and 480p modes you also have the Pan and Scan option.
- MADI (Motion Adaptive De-Interlacing) Setting
Choose between Vertical Temporal (VT) or Spatial and then adjust the MADI
threshold setting to your preference.
- Diagonal Interpolation (DI)
This toggles the diagonal processing. Diagonal processing can help remove jaggies
in scenes with diagonal lines. Set this feature in either on or off position.
- OSD Position
Use the OSD position controls to change the On Screen Display location to match
your preference.