Abit SG-80DC - Manual (Page 20)

2.5.4 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by a thin SATA
cable.
The disk array for RAID 0 or RAID 1 configuration is also provided through these SATA
connectors.
To connect SATA device:
1. Attach either end of the signal cable to
the SATA connector on motherboard.
Attach the other end to SATA device.
2. Attach the SATA power cable to the
SATA device and connect the other end
from the power supply.
2-12 SG-80DC