Aube Technologies TH109PLUS - Manual (Page 10)

Owner’s Guide 400-109-005-A
8
n
Press the Up and Down buttons simultaneously for three seconds to enter
the setup menu.
o
Press the Up or Down button to change the option.
p
Press the Up and Down buttons simultaneously and briefly to advance to
the next parameter.
q
When the last parameter is displayed, press the Up and Down buttons for
three seconds to save any changes and exit the menu.
NOTE: If you do not press any button for 15 seconds, the thermostat will automati-
cally save any changes you have made and will then return to its normal display.
Setup menu
Parameter Options
Display and
default setting
Minimum
setpoint
5°C - 30°C (41°F - 86°F)
NOTE: The minimum setpoint cannot be set higher than the
value set for the maximum setpoint.
Maximum
setpoint
5°C - 30°C (41°F - 86°F)
NOTE: The maximum setpoint cannot be set lower than the
value set for the minimum setpoint.
400-109-005-A (Calypso) ENG.fm Page 8 Monday, November 30, 2009 2:36 PM