INOR MINIPAQ-HLP GB - Manual (Page 2)

CALIBRATION
CONNECTIONS OUTPUT LOAD DIAGRAM
It is recommended to check the calibration once a year. Use equipment
with an inaccuracy of at least 5 times better than the checked transmitter,
e.g. if you are checking a transmitter with an inaccuracy of maximum
0.1% use instrument with an inaccuracy of maximum 0.02%.
Use the MinIPAQ Soft Basic Calibration function in the Options menu, and
follow the instructions on the screen.
INPUT CONNECTIONS DIMENSIONS
MOUNTING
RTD, 3-wire connection
Pt100, α =0.00385, Pt1000, α=0.00385
Pt100, α =0.003902, Pt100, α=0.003916
Ni100, Ni120, Cu10, Ni1000,
Pt(Spec), α=0.00385
Thermocouple
B, C, E, J, K, L, N, R, S, T, U
RTD
,
4-wire connection
Pt100, α=0.00385, Pt1000, α=0.00385
Pt100, α=0.003902, Pt100, α=0.003916
Ni100, Ni120, Cu10, Ni1000
Pt(Spec), α=0.00385
Head
mounting
kit
20 mm/
9.75 turns
18.5/0.72
44.5/1.75
ORDERING INFORMATION
LIMITED WARRANTY
INOR Process AB, or any other affiliated company within the Inor Group (hereinafter
jointly referred to as ”Inor”), hereby warrants that the Product will be free from defects
in materials or workmanship for a period of five (5) years from the date of delivery
(”Limited Warranty”). This Limited Warranty is limited to repair or replacement at
Inor’s option and is effective only for the first end-user of the Product. Upon receipt
of a warranty claim, Inor shall respond within a reasonable time period as to its
decision concerning:
1 Whether Inor acknowledges its responsibility for any asserted defect in
materials or workmanship; and, if so,
2 the appropriate cause of action to be taken (i.e. whether a defective
product should be replaced or repaired by Inor).
This Limited Warranty applies only if the Product:
1 is installed according to the instructions furnished by Inor;
2 is connected to a proper power supply;
3 is not misused or abused; and
4 there is no evidence of tampering, mishandling, neglect, accidental damage,
modification or repair without the approval of Inor or damage done to
the Product by anyone other than Inor.
This Limited Warranty is provided by Inor and contains the only express war-
ranty provided.
INOR SPECIFICALLY DISCLAIMS ANY EXPRESS WARRANTY NOT
PROVIDED HEREIN AND ANY IMPLIED WARRANTY, GUARANTEE
OR REPRESENTATION AS TO SUITABILITY FOR ANY PARTICULAR
PURPOSE, PERFORMANCE, QUALITY AND ABSENCE OF ANY HIDDEN
DEFECTS, AND ANY REMEDY FOR BREACH OF CONTRACT, WHICH BUT
FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION, OPERATION
OF LAW, CUSTOM OF TRADE OR COURSE OF DEALING, INCLUDING
IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. EXCEPT AS PROVIDED HEREIN,
INOR FURTHER DISCLAIMS ANY RESPONSIBILITY FOR LOSSES,
EXPENSES, INCONVENIENCES, SPECIAL, DIRECT, SECONDARY OR
CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE
OF THE PRODUCT.
Products that are covered by the Limited Warranty will either be repaired or replaced
at the option of Inor. Customer pays freight to Inor, and Inor will pay the return
freight by post or other “normal” way of transport. If any other type of return freight
is requested, customer pays the whole return cost.
MinIPAQ-HLP 70MQHLP002
Configuration 70CAL00001
ICON Configuration Kit (non-Ex) 70CFGUS001
Head mounting kit 70ADA00017
DIN-rail Adapter 70ADA00015
53/2.08
10/0.39
DIN-rail
Adapter
mm/inches