beautypg.com

HT instruments HT157 User Manual

Page 42

background image

HT155 - HT157

EN - 40

7. OPERATIONS WITH THE MEMORY

The instrument is provided with an internal Flash memory with a capacity of 64Kbytes for
saving data. Each saved measure can have a maximum size of up to 512 bytes, and
therefore it is possible to save up to 128 measure groups. The saved data can be
transferred onto the provided USB pen or transferred to the PC via USB connection and
analyzed with the provided software. Each measure can be recalled on the instrument’s
display.

7.1.

RECALLING RESULTS ON THE DISPLAY

1. Select the “Data” icon in any measuring mode (see Fig. 39) and confirm with “

Fig. 39: Selection of memory data viewing mode

2. The instrument shows the following screens, which can be selected by using the “ ”

and “

” keys

Fig. 40: Screens of saved data

Num

Indicates the number of the used memory location

Name

Indicates the measure name defined by the user

Date

 Indicates the date in which the measure was saved

Time

Indicates the time in which the measure was saved

Mode

Indicates the type of measure saved

 STA  statistic data analysis
 INT  data of an integration measurement inside the statistic analysis
 24Hxx  data of the “24Hours” measurement inside the statistic analysis. The two

characters “xx” indicate the number of the saved interval

 OCT  indicates the octave band analysis (1/1)
 1/3OCT  indicates the 1/3 octave band analysis (1/3)
 ALL  indicates the total analysis of results

3. Use the keys “

” or “

” for selecting the desired measure and confirm with “

”.

Press “ ” to go back to the main menu

This manual is related to the following products: