HT instruments EQUITEST5071 - Manual (Page 15)

EQUITEST 5071
EN - 13
6.1.2.1. Anomalous situations in "AUTO", "RT+", "RT-" mode
 If the instrument detects
a voltage higher than
approx. 15V at the input
terminals, the message
to the side appears on
the display.
LOW
 30.11.12
-.- -
R+ R-
-.--
 -.--
---mA ---mA
 VOLT IN INPUT
AUTO 0.11

The test cannot be
carried out because
voltage has been
detected at the
instrument’s inputs
FUNC CAL
 If the instrument detects
that:
R
CALIBRATION
> R
MEASURED
the message to the side
appears on the display.
LOW

30.11.12
 0.00
R+ R-
0.00
 0.00
219mA 219mA
 CAL > RES
AUTO 0.11

CAUTION:
R
CALIBRATION
> R
MEASURED
FUNC CAL
PREVIOUS RESULTS CANNOT BE SAVED.
 In case a resistance
higher or equal to 5

but lower than 99,9
 is
detected, at the end of
the test the instrument
gives out a long sound
and the following screen
appears on the display.
LOW
 30.11.12
 5.17
R+ R-
5.17
 5.17
209mA 209mA
AUTO 0.11

Resistance higher than 5

Test current
FUNC CAL
The results can be saved by pressing the SAVE key twice (see § 7.1).
 In case a resistance
higher than 99,9
 is
detected, at the end of
the test the instrument
gives out a long sound
and the following screen
appears on the display.
LOW
 05.06.12
Resistance with a value
higher than 99.9

> 99.9
R+ R-
-.--
 -.--
---mA ---mA
AUTO 0.11

CAUTION: Resistance
value out of range
FUNC CAL
The results can be saved by pressing the SAVE key twice (see § 7.1).