Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1539)

Brocade Network Advisor IP User Manual 1487
53-1003153-01
CLI Templates
G
TABLE 27 IronWare OS – Configure L2-Access-List
Feature Description CLI Commands
ACL Configure L2 access list for IronWare
products. access-list $ deny $
$ any
access-list $ deny any
$ $
access-list $ permit
$ $ any
access-list $ permit any any
no access-list $ permit any any
no access-list $ permit
$ $ any
TABLE 28 MCT Cluster Creation
Feature Description CLI Commands
MCT Create a session VLAN. vlan $ name Session-VLAN
tagged ethernet $
router-interface ve $
interface ve $
ip address $
MCT Create a keep–alive VLAN. vlan $ name MCT-keep-alive
tagged ethernet $
MCT Create cluster configuration. cluster $ $
rbridge-id $
session-vlan $
keep-alive-vlan $
icl $ ethernet $
peer $
rbridge-id $
icl $
MCT Specify single VLAN ID or range
[to ]. member-vlan $
NOTE: ICL ports should also be added to MCT Member VLANs.
TABLE 29 MCT Cluster Deployment
Feature Description CLI Commands
MCT Deploy cluster. cluster $ $
deploy
TABLE 30 MCT Cluster Undeployment
Feature Description CLI Commands
MCT Undeploy cluster. cluster $ $
undeploy