Progressive International Electronics #1 - Manual (Page 9)

TH E #1 Progressive International Electronics
Page 2 Version 2.0/August 2001
#1install
System Installation
System Evaluation
IMPORTANT!
The instructions included in this guide are for the installation of THE
#1, both postpay and prepay/postpay versions.
THE #1 consists of a console, an interconnection box and an
interconnection cable. One end of the interconnection cable is
factory wired into the interconnection box. The other end is factory
wired into a male plug. A receptacle for this plug is provided on the
console back panel.
The interconnection box must be matched to the console for proper
operation. Matching identification is supplied on the product labels
affixed to the console and the interconnection box.
This equipment is to be used with self-contained and remote
dispensers containing the following:
Self-contained dispensers
pulser circuit — .amp 12vdc
shutoff valve — 25watt 125 vac max
slowdown valve — 25watt 125 vac max
reset mechanism & pump motor circuit — ½ hp, 10amp 125vac
max
Remote pump dispensers
pulser circuit — .amp 12vdc
shutoff valve — 25watt 125 vac max
slowdown valve — 25watt 125 vac max
reset mechanism & pump motor circuit — ½ hp, 10amp 125vac
max