System installation warnings – Progressive International Electronics #1 User Manual
Page 8
Progressive International Electronics
TH E
# 1
Version 2.0/August 2001
Page 1
#1install
System Installation
System Installation Warnings
Safety hazards are inherent with all electrical equipment. Standard precautions must be taken
at all times during installation and operation of
THE
#1 systems. In addition to normal electrical
precautions, the following points should be noted during installation.
C
Installation must comply with National Electrical Code, as well
as Federal, State/Provincial, Local, and all applicable codes.
C
High voltages are present in
THE
#1 components, as well as the
equipment to which it is attaching. To prevent personal injury
or equipment damage, disconnect all power before
proceeding with installation.
C
THE
#1 equipment must be installed in nonvolatile,
noncombustible, nonexplosive areas. The main box must be
protected from severe vibration, extreme temperatures and
excessive humidity.
C
All
THE
#1 peripheral equipment must be installed in
nonhazardous locations.
For Use in USA
Installation of
THE
#1 must comply with the requirements of the
National Electrical Code (NFPA 70), the Automotive and Marine
Station Code (NFPA 30A), and all Federal, State, Local, and
applicable safety codes.
For Use in Canada
Installation of
THE
#1 must comply with requirements of the Canadian
Electrical Code, the Flammable and Combustible Liquid Code, and
all Federal, Provincial, State, Local, and applicable safety codes.