Progressive International Electronics #1 - Manual (Page 10)

Progressive International Electronics TH E # 1
Version 2.0/August 2001 Page 3
#1install
System Installation
Pre-Installation
Inspect all equipment when received for evidence of shipping
damage. If such has occurred, describe the damage and have the
carrier’s agent sign the description. Title to damaged equipment
remains with the buyer. It is the buyer’s responsibility to file a claim
with the carrier involved.
Check the 120vac outlet into which the console will be plugged. It
should be a properly grounded three prong receptacle. Poor
grounding can result in improper operation or shock hazard.
Check the labels on the backs of the console and interconnection box
to assure that they are properly matched. If they are not, call the
factory at once.
Check the junction boxes in the dispensers to be controlled to assure
that they contain adequate volume for the conductors to be installed.
The size of the junction box is specified and may be referenced by the
Underwriters Laboratories Standard, UL87.
Console Mounting
The console may be mounted in any convenient non-harardous
location, either horizontally or tilted. It must be mounted in such a
manner, however, that a free flow of air is assured around the
console. If the flow of air around the console is unduly restricted, the
console may overheat during extended operation.