IEI Integration HDC-3x-Series - Manual (Page 25)

HDC-3x Series Video Capture Card
Page 17
HDC-301E, HDC-302E & HDC-304E
Figure 2-1: HDC-3x Series Installation
Step 4: Insert a retention screw through the top of the video capture card external
bracket into the chassis to secure the card to the chassis. Step 0:
2.4 Install the HDMI Output Kit (HDC-304E Model Only)
The HDC-304E video card is shipped with an HDMI output kit in order to view the decode
video or bypass video on the HDMI display. To install the HDMI output kit please follow the
instructions below.
Step 1: Locate the HDMI output connector on the HDC-304E video capture card.
Step 2: Align the cable connector from the HDMI output kit with the HDMI output
connector on the HDC-304E.
Step 3: Push the cable connector onto the HDMI output connector making sure the pins
are correctly aligned.