IEI Integration IOVU-751R - Manual (Page 30)

IOVU-751R-CE5/UX-R10 User Manual
Page 21
4.1 Installation Precautions
When installing the IOVU-751R-CE5/UX-R10, please follow the precautions listed below:
ƒ Read the user manual: The user manual provides a complete description of
the IOVU-751R-CE5/UX-R10, installation instructions and configuration
options.
ƒ DANGER! Disconnect Power: Power to the IOVU-751R-CE5/UX-R10 must
be disconnected during the installation process, or before any attempt is
made to access the rear panel. Electric shock and personal injury might occur
if the rear panel of the IOVU-751R-CE5/UX-R10 is opened while the power
cord is still connected to an electrical outlet.
ƒ Qualified Personnel: The IOVU-751R-CE5/UX-R10 must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.
ƒ Mounting: It is advisable at least two people assist with mounting the
IOVU-751R-CE5/UX-R10.
ƒ Air Circulation: Make sure there is sufficient air circulation when installing
the IOVU-751R-CE5/UX-R10. The IOVU-751R-CE5/UX-R10’s cooling vents
must not be obstructed by any objects. Blocking the vents can cause
overheating of the IOVU-751R-CE5/UX-R10. Leave at least 5 cm of
clearance around the IOVU-751R-CE5/UX-R10 to prevent overheating.
ƒ Grounding: The IOVU-751R-CE5/UX-R10 should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the IOVU-751R-CE5/UX-R10.
4.2 External Peripheral Interface Connectors
204H204H
Table 4-1 lists the external interface connectors on the IOVU-751R-CE5/UX-R10.
Detailed descriptions of the connectors can be found following the table.