IEI Integration IOVU-751R - Manual (Page 25)

IOVU-751R-CE5/UX-R10 User Manual
Page 16
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
IOVU-751R-CE5/UX-R10 may result in permanent damage to the
IOVU-751R-CE5/UX-R10 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-751R-CE5/UX-R10. Dry climates are especially susceptible to ESD. It
is therefore critical that whenever the IOVU-751R-CE5/UX-R10 or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board , touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the IOVU-751R-CE5/UX-R10,
place it on an antic-static pad. This reduces the possibility of ESD damaging
the IOVU-751R-CE5/UX-R10.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the IOVU-751R-CE5/UX-R10 is unpacked, please do the following:
ƒ Follow the anti-static precautions outlined in Section
202H202H
3.1 .
ƒ Make sure the packing box is facing upwards so the IOVU-751R-CE5/UX-R10
does not fall out of the box.
ƒ Make sure all the components shown in Section
203H203H
3.3 are present.