IEI Integration POC-17i_19i-Series_IEI - Manual (Page 75)

POC-17i/19i Series
Page 63
5.3.6.1.4 Parallel Port Configuration
Î Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.
Î
Disabled Disable the parallel port
Î
Enabled D EFAULT
Enable the parallel port
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT
The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7
Î
IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7
Î
IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7
Î
IO=378h Parallel Port I/O port address is 378h
Î
IO=278h
Parallel Port I/O port address is 278h
Î
IO=3BCh Parallel Port I/O port address is 3BCh
Î Device Mode [Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
ƒ Standard and Bi-direction (SPP) mode Default
ƒ EPP-1.9 and SPP Mode
ƒ ECP Mode
ƒ ECP and EPP 1.9 Mode