A.1 safety precautions, A.1.1 general safety precautions, Afety – IEI Integration POC-17i_19i-Series_IEI User Manual
Page 113: Recautions

POC-17i/19i Series
Page 101
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the POC-17i/19i Series.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the system is
opened.
Make sure the power is turned off and the power cord is disconnected
whenever the system is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Use a power cord that matches the voltage of the power outlet, which has
been approved and complies with the safety standard of your particular
country.
Electric shocks can occur if the system chassis is opened when the system
is running.
Do not drop or insert any objects into the ventilation openings of the
system.
If considerable amounts of dust, water, or fluids enter the system, turn
off the power supply immediately, unplug the power cord, and contact the
system vendor.
Grounding reliability can only be achieved when the equipment is connected
to an equivalent receptacle marked “Hospital Only” or “Hospital Grade”.