IEI Integration AFL-4 series-N270 v2.10 - Manual (Page 88)

AFL-4 Series-N270 User Manual
Page 88

Not Installed BIOS is prevented from searching for an IDE disk
drive on the specified channel.

Auto D EFAULT The BIOS auto detects the IDE disk drive type
attached to the specified channel. This setting should
be used if an IDE hard disk drive is attached to the
specified channel.

CD/DVD The CD/DVD option specifies that an IDE CD-ROM
drive is attached to the specified IDE channel. The
BIOS does not attempt to search for other types of
IDE disk drives on the specified channel.

ARMD This option specifies an ATAPI Removable Media
Device. These include, but are not limited to:
 ZIP
 LS-120
 LBA/Large Mode [Auto]
Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical
Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the
maximum drive capacity is 137 GB.

Disabled BIOS is prevented from using the LBA mode control on
the specified channel.

Auto D EFAULT BIOS auto detects the LBA mode control on the specified
channel.
 Block (Multi Sector Transfer) [Auto]
Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the
device supports multi-sector transfers.

Disabled BIOS is prevented from using Multi-Sector Transfer on the
specified channel. The data to and from the device occurs
one sector at a time.