2 in-wall mounting, Figure 4-17: secure the panel pc, Figure 4-18: cut foam tape – IEI Integration AFL-4 series-N270 v2.10 User Manual

Page 63

AFL-4 Series-N270 User Manual

Page 63

Figure 4-17: Secure the Panel PC

4.10.2 In-wall Mounting

Before installing into a wall mounting, attach the foam adhesive strips to the sides as

shown below:

Step 1:

Place the AFL-4 Series-N270 face down on a flat surface.

Figure 4-18: Cut Foam Tape

Step 2:

Cut the adhesive foam tape as shown above.