3 usb device connection, 12 faceplate installation, Aceplate – IEI Integration AFL-4 series-N270 v2.10 User Manual

Page 71: Nstallation, Figure 4-29: usb device connection

AFL-4 Series-N270 User Manual

Page 71

4.11.3 USB Device Connection

There are four external USB 2.0 connectors. All connectors are perpendicular to the

AFL-4 Series-N270. To connect a USB 2.0 or USB 1.1 device, please follow the

instructions below.

Step 1:

Locate the USB connectors. The locations of the USB connectors are shown

in Chapter 2.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the bottom panel. See Figure 4-29.

Figure 4-29: USB Device Connection

Step 3:

Insert the device connector. Once aligned, gently insert the USB device

connector into the onboard connector.

Step 0:

4.12 Faceplate Installation

An optional faceplate in a variety of colors is available for mounting onto the AFL-4

Series-N270 frame.