IEI Integration uIBX-200-VX800 v2.10 - Manual (Page 91)

uIBX-200-R21/VX800 Embedded System
Page 81
Figure A-14: Select a Local Source Drive
Step 6: Select a source partition (Part 1) from basic drive as shown in
74
Figure A-15 .
Then click OK.
Figure A-15: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
74
Figure A-16 ). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO .