IEI Integration uIBX-200-VX800 v2.10 - Manual (Page 63)

uIBX-200-R21/VX800 Embedded System
Page 53
ƒ Disabled D EFAULT
ƒ Enabled
ƒ USB 2.0 Ports Enabled [Enabled]
The USB ports will only operate in the legacy USB 1.1 mode unless this setting is enabled.
ƒ Disabled D EFAULT
ƒ Enabled
ƒ Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Î
Disabled
Legacy USB support disabled
Î
Enabled D EFAULT
Legacy USB support enabled
Î
Auto Legacy USB support disabled if no USB devices are
connected
ƒ USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
Î
FullSpeed The controller is capable of operating at 12 Mb/s
Î
HiSpeed D EFAULT
The controller is capable of operating at 480 Mb/s