Agilent Technologies N2610A - Manual (Page 129)

Cable Testing in Expert Mode 5
The Expert Autotest Setup
Agilent FrameScope 350 User’s Manual 121
the Test Probe setting is not locked you will go directly to the
Password Screen, where you can choose to password protect your
profile.
3 If you choose to password protect your profile, you will be prompted
to enter the password. Once you are satisfied with your password
selection, press OK to return to the Autotest Settings screen, where
the locks will be shown. If it is password protected, you will now be
prompted to enter the password in order to modify this profile.
Creating a New Settings Profile
A new profile may be created either directly on the FrameScope
350 or on a PC using ScopeData Pro and subsequently
downloaded into the FrameScope 350. To create a settings
profile directly on the FrameScope 350:
1 You must configure all the Autotest Settings to the desired settings
prior to creating a new profile. Profiles created on the FrameScope