Ameriphone DIALOGUE XL 30 - Manual (Page 11)

5
Setting up Your XL-30
(continued)
For Wall Mounting
1. Pull the handset hook out as
shown in Figure 5 and
reverse its position so that the
hook points up and will hold
the handset when you hang
up.
2. Insert the tabs of the phone
base into the slots in the
lower position of the base as
shown in Figure 6. Push the
mounting bracket in and
down firmly until it snaps into
place.
3. Locate a desired wall phone
jack and hold phone upright.
4. Plug in the short phone line
cord and mount the phone
as shown in Figure 7.
Figure 4 - Connecting the Components
Figure 5 - Reversing the Hook
MANU AL
AUTO
Figure 6 - Mounting Bracket for Wall
Mounting
MANU AL
AUTO
Figure 7 - Wall mounting installation
Short phone
line cord
Line cord
handset
(curly) cord