PROLiNK PIC1007WP User Manual - Manual (Page 25)

1.18. Scheduling
The IP Camera provides scheduling function that triggers event actions such as E mail/Ftp sending, NAS/
Micro-SD recording or speaker alarm. Total of 12 schedules can be added with combination of event actions.
Before any schedule can be added, the “Schedule” option must enabled in the event actions settings. . There
is no conflict check for the scheduling, it means that the scheduling time could be overlapped, and the IP
Camera will do all the scheduled events during the overlapped time period.
1. Schedule list – all the schedules are listed in this area. Each listed item can be modified or deleted by
pressing the “Edit” or “Delete” button.
2. Email/ftp Alarm – selecting this will enable the email/ftp sending in the scheduled time period when
event alerts are triggered. The event trigger options are Motion, PIR and Temperature.
3. Speaker Alarm – selecting this will enable the built-in or external speaker to output an alarm siren
sound in the scheduled time period when event alerts are triggered. The event trigger options are Motion,
PIR and Temperature.
4. NAS Record – selecting this will enable NAS recording in the scheduled time period when event alerts
are triggered. The event trigger options for this feature are Continuous, Motion, PIR and Temperature. In
“Continuous” option the IP Camera will record video to the NAS device during the whole scheduled period.
For “Motion triggered” or “PIR triggered” or “Temperature”, the IP Camera will record video to the NAS
device for 30 seconds during the scheduled period each time when any event trigger is detected.
5. SD-Card Record – selecting this will enable SD-Card recording in the scheduled time period when event
alerts are triggered. The event trigger options are Continuous, Motion, PIR or Temperature. In “Continuous”
option, the IP Camera will record video to the SD-Card during the whole scheduled period. For “Motion
triggered”, “PIR triggered” or “Temperature”, the IP Camera will record video to the SD-Card for 30 seconds
during the scheduled period each time when any event trigger is detected.
6. For the scheduling period, you can choose between “Every week”, “Every day” or “Fixed time” :
a) For “Every week”, choose week days of the week and set the time duration of each day.
b) For “Every day”, set the time duration of every day for the scheduling.
c) For “Fixed time”, set the starting date/time and the end date/time of the scheduling period
Figure 3-18: Schedule management page
EN 25