Alcatel Carrier Internetworking Solutions 6800 - Manual (Page 10)

> 1 0 A L C AT E L
Advanced • 802.1x multi-client, multi-VLAN support for per-client authentication and VLAN assignment
Security • Authenticated VLAN that challenges users with username and password and supports dynamic
VLAN access based on user
• Support for host integrity check and remediation VLAN
• Support for Alcatel Quarantine Engine and quarantine VLAN
• Learned Port Security (LPS) or MAC address lockdown allows only known devices to have
network access preventing unauthorized network device access
• RADIUS and LDAP admin authentication prevents unauthorized switch management
• Secure Shell (SSL), Secure Socket Layer (SSL) and SNMPv3 for encrypted
remote
management communication
• Access control lists to filter out unwanted traffic including denial of service attacks
• Access control lists (ACLs) are per port, MAC SA/DA, IP SA/DA, ICMP type and code,
Ethertype, TCP/ UDP port
Performance
• Wire rate forwarding for 10/100/1000/10,000 port speeds
• Jumbo frames up to 9 KB
• 16 K MAC addresses
Routing • RIPv1/v2
Protocols • IPX RIP/SAP
• OSPF ECMP
• VRRP
• PIM-SM
• DVMRP
User Ports • OS6800-24, OS6800-48, OS6800-24L, OS6800-48L: 24 or 48 10/100/1000BaseT** RJ-
45 ports on the front panel. The last four 10/100/1000 RJ-45 ports are combo ports. Each
copper port is capable of auto-MDI/MDI-X sensing. The 10/100/1000BaseT ports will
operate in full/half duplex mode when the speed is 10/100 Mbps. When operating in 1,000
Mbps, only full duplex mode is supported.
• OS6800-U24: 24 SFP (miniGBIC) ports that support Gigabit optical transceivers.
The last four SFP ports are combo ports.
Stacking ports • OS6800-24, OS6800-48, OS6800-24L, OS6800-48L: 2 built-in stacking ports that provide
10 Gbps full-duplex bandwidth per stacking port. OS6800 supports a fault tolerant looped
stacking configuration.
Combo • OS6800-24, OS6800-48, OS6800-24L, OS6800-48L: Four Gigabit Ethernet SFP (miniGBIC)
Ports combo ports are located on the front panel. Users determine whether the miniGBIC or
10/100/1000 port will operate. The miniGBIC ports support full duplex mode only.
Redundancy is provided if operational link fails..
• OS6800-U24: Four 10/100/1000BaseT combo ports are located on the front panel. Each
copper port is capable of auto-MDI/MDI-X sensing. When operating in 1,000 Mbps, only full
duplex mode is supported. The 10/100/1000BaseT ports will operate in full/half duplex
mode when the speed is 10/100. Redundancy is provided if the operational link fails.
Product Specifications
Features
**Non-combo ports on OS6800-24L and OS6800-48L operate at 10/100, but are upgradeable to 10/100/1000 with the purchase of a software license