Luminex 100 User Manual Version 1.7 - Manual (Page 64)

Luminex 100 User Manual Version 1.7 x MAP Technology
6 - 14 PN 89-00002-00-063 Rev. A
Right-Click Menu
Other commands appear on the right-click menu. To open this menu,
right-click any sample cell.
Figure 6-16. Right-Click Menu
Load Data: Displays the data, including histogram and events
information, of a selected (highlighted) sample.
Start/Cancel: Begins or ends data acquisition.
Delete Data: Deletes the data from a selected sample row.
Copy: Copies selected information from the results table to the
Windows clipboard.
Session Settings
Click Settings on the toolbar to see the Settings dialog box. The
Settings dialog box contains two tabs, General and Bead Set. These
settings apply only to the open session.
Figure 6-17. Settings Dialog Box - General Tab
General tab Use the General tab to provide information about the data collection.
Description: Describe the experiment.
Operator: Identify the experimenter.
Events: Enter a number between 1 and 100,000 if you are using total
events, or a number between 1 and 1000 if you are using events per
microsphere set.