Magnum Venus Plastech PATRIOT 10 PAT-PH-10000 - Manual (Page 22)

Patriot Powerhead Manual PAT-PH-10000
Rev. 10/2012 Page | 22
MPH-2526
O-U-006
MPH-2540
MPH-2533
O-B-012
MPH-2541
MPH-2528
MPH-2512
O-B-008
MPH-2513
O-B-012
MPH-2511-01
SPRING (MPH-2528)
Fig. 7
STEM SEAL (MPH-2511-01)
Fig. 6
8. Insert the Spring (MPH-2528) with the Seal Guide (MPH-2512) into the End Cap.
Set the small end of the Seal Guide (MPH-2512) onto the Spring (MPH-2528).
Set a new O-ring (O-B-008) on top of the Seal Guide (MPH-2512). Screw the
Stem seal (MPH-2511-01) with Valve Stem (MPH-2513) into the Upper End Cap.
9. Repeat the Pilot Valve rebuild on the Lower End Cap (PAT-PH-10004).
VALVE STEM (MPH-2513)
O-RING (O-B-008)
SEAL GUIDE (MPH-2512)
O-RING (O-B-012)