IQinVision IQA-CNR - Manual (Page 5)

5
4 Attaching Alliance or Sentinel Camera to Adapter
A. Attach Alliance (with or without Wall Mount Kit) or Sentinel Series camera
system to Corner and Pole Mount Adapter per the installation instructions
shipped with your product.
1. Line up the four mounting holes on the camera’s Back Box or Wall Mount
Back Box with the corresponding holes on the face of the Corner and
Pole Mount Adapter (see Figure 4.1).
2. Using the appropriate hardware, secure the 4 included screws through the
mount holes in the camera Back Box or Wall Mount to the threaded receivers
on the Corner and Pole Mount Adapter.
Adapter Hole Legend:
Sentinel or Wall Mount Adapter Kit
Alliance-pro (without Wall Mount Kit)
Alliance-mx (without Wall Mount Kit)
Wall Mount without Back Box
Alliance-mx wire access (when mounting Alliance-mx directly to
Corner and Pole Mount Adapter)
Figure 4.1