INTELLINET NETWORK 524988 User Manual - Manual (Page 6)

6
SYSTEM & NETWORK SETUP
2 SYSTEM & NETWORK SETUP
2.1 Connecting the Router
1. Connect your DSL or cable modem to the WAN port of the router using the
provided RJ45 Ethernet cable. NOTE: Standard modems provided by Internet
service providers come with at least one LAN/Ethernet port, which connects to
the WAN port of the router.
2. Connect all your computers and network devices (network-enabled components
like game consoles, network media players, network storage units or LAN
switches) to the LAN ports (1-4) of the router.
3. Connect the A/C power adapter to the wall socket, and then connect it to the
power jack of the router.
4. Check all LEDs on the front panel. The PWR LED should be on, and the WAN
and LAN LEDs should be on if the computer or network device connected to the
corresponding router port(s) is powered on and correctly connected.
2.2 Obtaining an IP Address
Before you can connect to the router and start configuration procedures, your
computer must be able to obtain an IP address automatically (that is, to use a
dynamic IP address). This is the default setup
for any standard Windows computer, and it
normally is not required to make any changes.
1. With your computer connected to a LAN port
on the router, activate the network
connection. Start your Web browser and
open http://192.168.2.1 to display a login
window (right).
2. Enter “admin” as the username and “1234” as
the password, then click “OK.”
1 3 2 2