Biamp A4 - Manual (Page 66)

Audia-Manual-A4
Set IP Address
Audia IP Configuration assigns a
device IP Address such as
192.168.1.X
(where range of X =
1~254). The factory default IP Address
is 192.168.1.101. However, IP
Addresses cannot be duplicated, even
in simple (Audia® only) networks, and
must be carefully managed when
network topology is more complex.
Audia CobraNet IP Configuration
assigns an IP Address to the Audia
control interface presented by the
CobraNet module in the Audia device.
Use the default setting (Obtain an IP
address automatically) in all cases,
except when adding CobraNet to an
existing Ethernet network (not
recommended). These settings may
also be accessed via
RS-232 control
(ATP) command strings.
46