Lexibook RCD170BB - Manual (Page 11)

11 English
To play a CD:
1. Move the FUNCTION selector to
CD/MP3. The display briefly reads "- -
-" to count (and afterwards show) the
number of tracks stored on the CD. If
you see "no" instead, either a CD has
not been inserted or the appliance
cannot read it.
2. Open the CD compartment by briefly
pushing the OPEN/CLOSE area. The
display reads "- - -".
3. Place the CD on the spindle, the label
pointing upwards.
4. Close the compartment. The disk will
revolve a couple of times and the
display will show the number of tracks
on it.
1
1
Press the PLAY/PAUSE button to
start replay. The display shows and
the track number.
Then the appliance will start playing all
tracks one after the other. After the
last one it will stop.
2
2
TO INSERT AND PLAY A CD
CONTINUED ON THE NEXT PAGE
OPERATION (CONTINUED)
10
• The appliance is designed to play back MP3 and other audio CDs. You will be
made aware of functions that differ depending on whether a MP3 or other audio
CD is played.
• "MP3" being shown on the display is telling you that you are playing a MP3 CD.
Adjust the VOLUME control as desired.
1 1
3
RCD170BB_02IM0449.qxd:CD2849.QXD 27/10/09 17:13 Page 11