I-View ATX-100V/ARX-100V/ARX-400V Multi-videos Transmission System - Manual

Rear Panel Front Panel
1 2 3 4 5
Rear
1 2 3 4
Front
5 6 7
Product Overview:
ATX-100V Function Description:
1.) BNC ports: To connect with camera device for input video signal.
2.) Gain dip switch: According to the cable category and distance, user may need to adjust this switch to get optimum video picture.
3.)
Terminal blocks: The terminal blocks V+ (& V-) ports of ATX-100V need to connect and match with remote V+ (& V-) of
ARX-400V / ARX-100V by UTP wire of category 2 to 5 or better.
As for “S “ surge suppression port connects to earth-ground by shorter than 10 feet 16AWG or thicker cable.
4.) Power jack: Input and output DC12V power supply for itself and another device (e.g. camera).
Total current cannot over power consumption of ATX-100V and connecting device.
5.)
Power indicator: To indicate ATX-100V’s power status.
ARX-100V Function Description:
1.)
BNC ports: To connect with BNC connector of monitor or DVR.
2.)
Bright/Sharp adjusters: To adjust video’s quality with a monitor for remote camera’s video signal.
3.)
Gain dip switch: According to the cable category and distance, user may need to adjust this switch to get optimum video picture.
4.)
Terminal blocks: The terminal blocks V+ (& V-) ports of ARX-100V need to connect and match with remote V+ (& V-) of
ATX-100V or V- (& V+) of PTT-130V (S) / PTT-120V by UTP wire of category 2 to 5 or better.
As for “S “ surge suppression port connects to earth-ground by shorter than 10 feet 16AWG or thicker cable.
5.)
Impedance adjuster: To increase and restore original video signal.
6.)
Power jack: Input and output DC12V power supply for itself and another device (e.g. camera).
7.) Power Indicator: The Green LED for indicates ARX-100V’s power status.
The terminal blocks or RJ-45 V+ (V-) of ARX-100V & ARX-400V (at DVR site) need to connect and match with V- (V+) of
PTT-120V / PTT-100VP / PTT-130V(S) connecting devices (at camera site).
ATX-100V/ARX-100V/ARX-400V Installation Guide
V1.7