I-View EC-5MIPN 5-Megapixels Day/Night Box IP Camera User Manual

Page 20

Network Port: Used to connect a PoE or LAN cable. Power indicator (Green LED) will be on

when connect with the PoE Hub; the Orange LED will be flash when plug the communication is

available.

Audio Out: The terminal block is connected the speaker to output voice.

Audio In: The terminal block is connected the microphone for audio signal input.

10.

Rest: Press and release the recessed reset button with a straightened paper clip.

11.

Micro SD Slot: Inserts SD card for video/snapshot recording. Max.64GB SDHD card supported.

12.

Antenna: For WI-Fi Antenna adapter (Revised).

13.

Power Indicator: The LED will be on when plug the DC 12V power adapter or POE Hub.

14.

USB Port: Used to Wi-Fi adapter (Revised).

15.

Terminal Block: See the pin define as below:

Alarm Out: Digital output (1A/1B); Connects to external peripherals by wire
Alarm In: Digital input; Accept dry contact signal only.
Ground: Common port where the alarm in signal is connected.
RS-485 (-)/ (+) : RS-485 control port for the Pan/Tilt motor . The protocol supports Pelco P

and Pelco D.

16.

BNC Port: Composite Video output.

17.

Power Port: Used to plug the DC 12V power adapter when no use PoE Hub.