BVA Hydraulics PAR1703, PARD1701, PARD1703, PARM1703 - Manual (Page 2)

2
Save these instructions. For your safety, read and
understand the information contained within. The owner and
operator shall have an understanding of this product and safe
operating procedures before attempting to use this product.
Instructions and safety information shall be conveyed in
the operator's native language before use of this product
is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and
misuse of the product. If any doubt exists as to the safe and
proper use of this product as outlined in this factory authorized
manual, remove from service immediately.
Figure 1 - Model PAR1703 / PARM1703 Components
Inspect before each use. It is recommended that, prior
to each use, an inspection be done by qualified personnel
and that any missing or damaged parts, decals, warning/
safety labels or signs be replaced with BVA Hydraulics
authorized replacement parts only. Any pump that appears
to be damaged in any way, is worn, leaking or operates
abnormally shall be removed from service immediately until
such time as repairs can be made. Any pump that has been
or suspected to have been subject to a shock load (a load
dropped suddenly, causing the system pressure to exceed
10,000 PSI), shall be removed from service immediately until
checked out by a BVA Hydraulics authorized service center.
Owners and operators of this equipment shall be aware that
the use and subsequent repair of this equipment may require
special training and knowledge.
To reduce the risk of personal injury and/or property
damage, ensure that the rated working pressure of
each pressurized attachment be equal to or greater than
the rated working pressure developed by the hydraulic
pump.
reservoir
muffler
input air
direction control valve
lever knob
fluid ports
carry handle dump valve
BVA Rotary Air Hydraulic Pumps provide high volume, high
pressure fluid to compatible applications i.e. rams, presses,
spreaders, compactors and crimping machines, anywhere
that 10,000 PSI of fluid pressure is needed. Special skill,
knowledge and training may be required for a specific task
and the product may not be suitable for all the jobs described
above. Unsuitable applications would include applications
that call for a device to move, level or support persons,
animals, hazardous materials, mobile homes/ dwellings in
general, mirrors and/or plate glass, and/or to connect/secure
hatches, components, etc. between bulkheads. The user
must ultimately make the decision regarding suitability of the
product for any given task and assume the responsibility of
safety for himself or herself and others in the work area.
PRODUCT DESCRIPTION
!
!
! Always check connections before using.
Alteration of these products is strictly prohibited.
Use only those adapters and attachments provided and
approved by the manufacturer.
Applications may react instantly to the high volume,
high pressure fluid provided by this pump! Only
competent, skilled and adequately trained individuals shall
operate this equipment!
drain plug
Figure 2 - Model PARD1701 Components
input air
muffler
carry handle
fluid port
drain plug
dump valve
lever
PW3 valve (PAR1703)
PW4 valve (PARM1703)