Brickcom BRC-64 - Manual (Page 65)

the snapshot frequency per notification.
4.2.1.1 Users can modify Digital Input Event service and Camera status by hot-
key such as F5，F6，F7，F8，Ctrl+F5，Ctrl+F6，Ctrl+F7，and Ctrl+F8.
Alarm for Digital Input Event Service will trigger if the status between
external device attached to the camera and that of the camera is the
same. The following steps are how to get the digital input status of
camera.
Hotkey Description
F2 Enable all Record
F3 Enable all MD Record
F4 Disable all Record
F5 Set selected camera DI Status to Low
F6 Set selected camera DI Status to High
F7 Set all cameras DI Status to Low
F8 Set all cameras DI Status to High
Ctrl+F5 Set selected camera DI detection disable
Ctrl+F6 Set selected camera DI detection enable
Ctrl+F7 Set all cameras DI detection disable
Ctrl+F8 Set all cameras DI detection enable
F9
Show DI Status in Video Frame(10 Sec)
4.2.1.2 Click the button to connect the setting dialog page for
camera via the path “Setting
→
Settings
→
Cameras.”
65 65