AIPTEK MobileCinema i55 - Manual (Page 8)

User’s Manual
2
EN
Charging the product
Connect one end of the bundled USB cable
to the Micro USB port of the product and the
other end to iPhone power adapter for
charging.
* After 3 hours the projector is fully
charged, the LED light will be turned off.
* iPhone 5 power adapter is not included.
Connecting iPhone 5 or HDMI-out Devices
Connecting iPhone 5
1. Take out the HDMI compartment cover from the projector.
2. Insert the HDMI port end of Apple Lightning Digital AV Adapter into the HDMI
connector of the projector.
3. Press both top side buttons of the front holder to switch it down.
4. Slide the iPhone 5 into the top side of the projector.
5. Press the top side buttons to switch back the front holder
6. Insert the lightning end of Apple Lightning Digital AV Adapter into the iPhone
through the hole tightly as below illustrations indicates.
* Apple Lightning Digital AV Adapter is not included.
Connecting HDMI devices
Use the optional HDMI cable to connect your HDMI-out device with the HDMI
port of the projector.
* HDMI cables are not included in the package.
1
2