PowerWalker ViewPower PowerWalker - Manual (Page 4)

3
Google chrome, Safari, Opera, Avant Browser, and Deepnet Explorer.
1.3. Applications
Monitor and manage the local UPS connected to local computer
Monitor and manage other UPSs (with software installed) in LAN
Remote monitor and manage other UPSs via INTERNET from remote PC (with
software installed)
1.4. Features
Allows control and monitoring of multiple UPSs via LAN and INTERNET
Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery
capacity)
Safely OS shutdown and protection from data loss during power failure
Warning notifications via audible alarm, pop-up screen, broadcast, mobile
messenger, and e-mail
Scheduled UPS on/off, battery test, programmable outlet control, and audible
alarm control
Password security protection and remote access management
2. ViewPower Install and Uninstall
2.1. System Requirement
512 MB physical memory at least (1 GB is recommended)
1 GB hard disk space at least
Administrator authority is required
More than 16-bit colors and 800 x 600 or above resolution display is
recommended
TCP/IP protocol must be installed for network management
An available communication port (RS232 serial port or USB port) is needed