PowerWalker ViewPower PowerWalker - Manual (Page 36)

35
Delay time to shutdown system: Enter the delay time to shut down the
operating system. The value range is from 1 to 99 minutes.
On shutdown execute file: Enter the path of execute file.
Warning Dialog Setting:
Pop-up dialog before shutdown: Timer setting for pop-up warning dialog
displayed in local PC. Local PC will pop up a warning dialog before system
starts to shut down. The range is from 1 to 999 seconds.
Warning dialog interval: Reminding dialog interval setting. This setting also
applies for UPS shutdown because of power failure. The range is from 1 to 999
seconds.
5.2.2. Remote Shutdown
This configuration is to remote shut down specific PCs which are powered by monitored
UPS.
Step 1 Select UPS Setting >> Remote Shutdown. Refer to Diagram 5-12.
Diagram 5-12
Step 2 Select remote shutdown conditions.