Dual Electronics XDM6400 - Manual (Page 16)

16
XDM6400 OPERATION
USB Operation - MP3/WMA Files (Optional)
Play MP/WMA files from most mass storage devices by
connecting them to the XDM6400's USB port. To connect a
USB device, lift the protective cover to expose the USB port.
Line up the connectors, and insert the USB device into the
port. The USB icon will appear in the display.
When a USB device is first connected, “READING” will
appear momentarily in the display. Depending on the
number of files and folders, this may take several seconds.
Music will begin playing automatically unless a Bluetooth
phone call is detected. If no valid MP/WMA files are
detected, "NO FILE" will be displayed and the last mode will
be resumed.
Press DISP to select between elapsed time (default), track
number, clock, track name, directory name, title, artist and
album.
"NO TITLE" will be displayed if no song title information is
available.
"NO ARTIST" will be displayed if no artist information is
available.
"NO ALBUM" will be displayed if no album information is
available.
This icon will illuminate when the song title is displayed.
This icon will illuminate when the artist name is displayed.
This icon will illuminate when the album name is displayed.
This icon will illuminate when the folder name is displayed.
Maximum character display information
• Track name – character maximum
• Directory name – character maximum
• *Song title – character maximum
• *Artist name – character maximum
• *Album name – character maximum
*Song title, artist name and album name will only be
displayed if included with the MP/WMA file.
Connecting a USB Device
(sold separately)
Playing Music
Displaying Information
Title Icon
Artist Icon
Album Icon
Folder Icon
Character Support