RocketFish RF-GUV1124 - Quick Setup Guide - Manual (Page 10)

10
Powerline Ethernet switch
Install the powerline
Ethernet switch on
the same home
power circuit as your
powerline Ethernet
bridge, and near
your gaming console
or other device.
Connecting your
powerline devices
To connect your
powerline bridge:
1 Plug your powerline bridge directly into a wall power socket. If
other appliances are plugged into the same outlet, isolate them
from the powerline bridge by using a noise-filtering power strip.
2 Plug an Ethernet cable into the Ethernet port on the powerline
bridge and to an available Ethernet port on your network router.
To connect your powerline switch:
1 Plug your powerline switch directly into a wall power socket. If
other appliances are plugged into the same outlet, isolate them
from the powerline bridge by using a noise-filtering power strip.
2 Plug an Ethernet cable into an available Ethernet port on the
powerline switch and into an Ethernet port on a networkable
device, such as a computer, Internet-connected TV, or game
console. You can connect up to four network devices to your
powerline switch.
10-0764 GUV1124-EN.fm Page 10 Wednesday, November 3, 2010 10:21 AM