Acme BH04 - Manual (Page 4)

4
GB
Call handling
To make a call. Use your phone in the normal way when the headset is connected to
your phone.
To answer a call. Press the Answer/end key, or use the phone keys. If the automatic
answer function is set on, the phone automatically answers the incoming call after one
ring.
To end a call. Press the answer/end key or use the phone keys.
Redial the last dialed number
Press and hold Volume up (r) key for 3 second to redial the last dialed number (if your
phone supports redialing with this device).
Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use this
voice dialing function, your mobile phone must provide this option and corresponding
voice samples must have been recorded.
Step-1. Press the Answer/end button of the headset one time, you will hear a beep
prompt.
Step-2. When you hear a short tone, say the name of the person you wish to call loudly.
Adjust the earphone volume
Volume up. While in conversation, press the Volume up (r) button to increase the
volume.
Volume down. While in conversation, press the Volume down (s) button to decrease
the volume.
Switch the call between phone and headset
During a conversation, press and hold the Answer/end button for 3 Seconds, the BH04
will be switched off and the call will be transferred to your mobile phone. If you want to
transfer the call back to your BH04 press and hold the Answer/end for 3 seconds till you
hear a beep. Release the button and the call is transferred back to your BH04.
Battery information
Your device is powered by a rechargeable battery. The full performance of a new battery
is achieved only after two or three complete charge and discharge cycles. The battery
can be charged and discharged hundreds of times, but it will eventually wear out.