Acme BH04 - Manual (Page 3)

3
GB
Pair the headset with a compatible phone
1. Make sure your headset is turned off.
2. Push the answer/end key for 7 seconds until the blue and red light flashes alternately.
3. Activate the Bluetooth feature on the phone, and set the phone to search for
Bluetooth devices. See the user guide of your phone for instructions.
4. Select the headset (BH04) from the list of found devices.
5. Enter the password code 0000 to pair and connect the headset to your phone. In
some phones you may need to make the connection separately after pairing. See
the user guide of your phone for details. You only need to pair the headset with your
phone once.
6. If the pairing is successful, the headset’s blue light will flash 3 times briefly for the
first time follow by a single flash every 5 seconds. The headset’s name appears in the
phone menu where you can view the currently paired Bluetooth devices.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the phone to
another Bluetooth device) do one of the following:
· Switch off the headset.
· Disconnect the headset in the Bluetooth menu of your phone.
· Move the headset more than 10 meters (30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the connection in
the Bluetooth menu of your phone, or press and hold the Answer/end key.
You can set your phone to connect with the headset automatically when the headset is
switched on. See the user guide of your phone for details.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
· Ensure that the headset is charged, switched on, paired with and connected to your
phone.
· Ensure that the Bluetooth feature is activated on your phone.
· Check that the headset is within 10 meter (30 feet) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.