FIAT Panda Classic - Manual (Page 143)

141
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
❒ remove the transparent cover A-fig.
28 from bulb holder (it is pressure-fit-
ted);
❒ remove the bulb B and replace it;
❒ refit the lens.
❒ loosen cover C-fig. 30 and remove the
connector D;
❒ release clip E-fig. 31 and remove the
bulb F;
❒ refit by reversing the above mentioned
operations.
FRONT FOG LIGHTS
(where provided)
To change the halogen bulb, proceed as
follows:
❒ slacken the two fog light fastening
screws A-fig. 29 on the bumper;
❒ slacken the two fog light fastening
screws B under the bumper;
❒ remove the protection including the fog
light and remove the connector;
fig. 29 F0G0227m fig. 28 F0G0604m fig. 30
TOP OFF
ON
F0G0228m
fig. 31 F0G0229m